Software Updates > Nativ Wave DAC
Software 1.0.9 addresses the following issues:
To install the software please proceed as follows:
1) Download the firmware update at the link above and copy the unzipped file (named “DAC_AP.bin“) to a USB stick (must be formatted in FAT32 and not bigger than 32GB).
2) Plug the USB stick into the USB port on the Nativ Wave DAC
3) Power ON the DAC
4) The DAC will now upgrade the firmware automatically. The LEDs behind the buttons will flash during the upgrade.
5) After the installation has been complete press the power button on the DAC or remote control to boot up the DAC.
After the installation please make sure the DAC says version 1.0.9 when booting up.