Setup Wizard.
Starting up Nativ Pulse for the first time.
![]() |
![]() |
When you turn on the Nativ Pulse Linear Power Supply for the first time it will walk you through the most important settings.
![]() |
![]() |
The Up/Down/Left/Right and Center button refer to the capacitive touch buttons on the glass surface right to the two OLEDs:
Use the Up & Down buttons to navigate between the different setting options and the Left & Right buttons to adjust each setting option. To confirm the setting navigate to the CONFIRM option and then tap on the Center button.
1. Display Settings
Like on the Nativ Wave DAC the display settings allow you to define what you want to see on the left and right OLED.
![]() |
![]() |
The settings are as follows:
Display Mode
Define if the 2 OLEDs should always be on or off.
The options for the Left + Right Display are as follows:
a) Current (Output)
b) Voltage (Input)
c) Voltage (Output)
d) Wattage (Output)